|
03-09-2019
|
#27 |
 
Join Date: May 2010
Location: Japan
Posts: 3,582
|
Re: CHMSL LED mod
Hey, I’ll blame it on Yun, who blames Charlie for my CHMSL LED mod today....LOL. I did the Harbor Freight one to my 90 way back when, but wanted a better one for the 95. Japan is LED country so I went to the local DIY store and got a 30 cm or 12” strip for $12 US. It was about an inch too long on each side, but it wraps around nicely on the inside. The install was easy and all I did with cut the wires and soldered, then heat shrink. I lined up the LED strip on the center on the lens and borrowed the wife’s crafting glue gun to adhere the strip to the lens. Since the glue is clear you can’t see it at all from the outside.
I love how it turned out and a nice cheap mod while waiting for the exterior LED bulbs to show up. Thanks for the inspiration Yun!!
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 
Last edited by HAWAIIZR-1; 03-09-2019 at 09:40 AM. |
|
|
|
|
Threaded Mode