|
08-16-2008
|
#1 |
 
Join Date: Mar 2006
Location: Lubbock, TX
Posts: 79
|
Clutch Slave Replaced
I got my clutch slave cylinder replaced today. I ordered from rockauto.com (Dorman Part #CS360017) $64 shipped. Looks to be a better part than the original. It is cast steel instead of stamped.
Time will tell, thought I would share the part # and observation. Later =D>
__________________
Jon R. Member #490 1992 ZR-1 Arctic White/Red 2008 Z51 Silver 6 spd (Daily driver) 
|
|
|
|
08-18-2008
|
#2 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
Re: Clutch Slave Replaced
I'm just curious about the cast slave and having enough threads left on the mounting studs....any issues with that aspect.
I'm asking because I bought a cast slave from RockAuto back in 05-06 made by Fedral-Mogul and the flange looked so thick to me that I would have had an issue of not having enough thread left to put the mounting nuts back. TIA  Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
08-18-2008
|
#3 | |
|
Join Date: Mar 2006
Location: Lubbock, TX
Posts: 79
|
Re: Clutch Slave Replaced
Quote:
__________________
Jon R. Member #490 1992 ZR-1 Arctic White/Red 2008 Z51 Silver 6 spd (Daily driver)
|
|
|
|
|
|
08-20-2008
|
#4 |
|
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,609
|
Re: Clutch Slave Replaced
Thanks Jon!
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
 |
|
|
Linear Mode
