Valve Cover Emblem ?'s - ZR-1 Net Registry Forums

32valvZ · 03-20-2009

1. Who has them?
2. How much do they run?
3. How do you remove them?
Thanks, John

GOLDCYLON · 03-20-2009

NLA but repros are available out there. I have a set of repros available if you need a pair. Jeffvette sells them and he PCs them and paints them by hand. I believe I bought this set from him or Carter200 that bought them from Dandy I honestly cant remember which and I have one pair available unused. The MY 90s are different from the MY 91-95. The pair I have are for the 91-95s. The colors are different not the shape or size. You wont find them in a Madvet or Ecklers catalog.

For originals ive seen them go on EBAY for over $125 easy thats EACH mind you and usually thats for a high quality used one. For a NOS mint unused one the skys the limit. The last mint pair of NOS emblems I saw on Ebay fetched almost $400 which is crazy I guess unless your a NCRS fanatic. The repros are in the about $125 a pair region.

Take a very small thin flat blade like a jewelers screwdriver to slowly pry up the edges. They will bend as you pry them up slowly as they are only potmetal. Work the sides and tops and bottom and go slow. Dont be surprised when they let go. The new emblem can be held in the camcover recesses by either using double sided adhesive or high temp RTV which is what I used on my car after getting the top end PCed.

PM if you want this pair I can pull them out of my garage stash and take a pic for you. Dont ask me why I bought two pairs, I just did lol GC

GOLDCYLON · 03-20-2009

Quote:

Originally Posted by GOLDCYLON

NLA but repros are available out there. I have a set of repros available if you need a pair. Jeffvette sells them and he PCs them and paints them by hand. I believe I bought this set from him or Carter200 that bought them from Dandy I honestly cant remember which and I have one pair available unused. The MY 90s are different from the MY 91-95. The pair I have are for the 91-95s. The colors are different not the shape or size. You wont find them in a Mavet or Ecklers catalog.

For originals ive seen them go on EBAY for over $125 easy that EACH mind you and usually thats for a high quality used one. For a NOS mint unused one the skys the limit. The last mint pair of NOS emblems I saw on Ebay fetched almost $400 which is crazy I guess unless your a NCRS fanatic. The repros are about in the about $125 a pair region.

Take a very small thin flat blade like a jewelers screwdriver to slowly pry up the edges. They will bend as you pry them up slowly as they are only potmetal. Work the sides and tops and bottom and go slow. Dont be surprised when they let go. The new emblem can be held in the camcover recesses by either using double sided adhesive or high temp RTV which is what I used on my car after getting the top end PCed.

PM if you want this pair I can pull them out of my garage stash and take a pic for you. Dont ask me why I bought two pairs, I just did lol GC

Another option is to leave them off and do what my friend Phil did to his 91 when he had the top end done. I think this looks pretty good as well. Just putting another idea out there for you. Daryll

32valvZ · 03-20-2009

Thanks Daryl. I gatta admit, I didnt expect them to be cheap, but dang!! I'll have my 92 at VOTR this year, and my engine looks pretty good, but the emblems have had it! PM me with a price when you get a chance.
Thank you, John

Ccmano · 03-20-2009

Last I looked Haibeck had them on his site at about $50 apiece for repro's. Still alot if you ask me.

H

RICKYRJ1 · 03-20-2009

Haibeck I beleive is $75.00 for repro's

ZZZZZR1 · 03-20-2009

Quote:

Originally Posted by RICKYRJ1

Haibeck I beleive is $75.00 for repro's

yup!

http://www.zr1specialist.com/HAT%20W...ts/emblems.htm

Look OEM though!

PhillipsLT5 · 03-20-2009

A pinstripper painted mine
I did get a set from Jeff, not on yet
There was a guy in Wisconsin years ago that made them

GOLDCYLON · 03-20-2009

Quote:

Originally Posted by 32valvZ

Thanks Daryl. I gatta admit, I didnt expect them to be cheap, but dang!! I'll have my 92 at VOTR this year, and my engine looks pretty good, but the emblems have had it! PM me with a price when you get a chance.
Thank you, John

Hi John heres a Pic they are adhesive backed like the one Haibeck sells as well. Price Pmed

GOLDCYLON · 03-20-2009

Quote:

Originally Posted by PhillipsLT5

A pinstripper painted mine
I did get a set from Jeff, not on yet
There was a guy in Wisconsin years ago that made them

Yep that was Dandy but he doesnt make them anymore. Nice guy although. I beleive he sold everything to Jeff

03-20-2009	#1
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,061	Valve Cover Emblem ?'s 1. Who has them? 2. How much do they run? 3. How do you remove them? Thanks, John

03-20-2009	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,117	Re: Valve Cover Emblem ?'s NLA but repros are available out there. I have a set of repros available if you need a pair. Jeffvette sells them and he PCs them and paints them by hand. I believe I bought this set from him or Carter200 that bought them from Dandy I honestly cant remember which and I have one pair available unused. The MY 90s are different from the MY 91-95. The pair I have are for the 91-95s. The colors are different not the shape or size. You wont find them in a Madvet or Ecklers catalog. For originals ive seen them go on EBAY for over $125 easy thats EACH mind you and usually thats for a high quality used one. For a NOS mint unused one the skys the limit. The last mint pair of NOS emblems I saw on Ebay fetched almost $400 which is crazy I guess unless your a NCRS fanatic. The repros are in the about $125 a pair region. Take a very small thin flat blade like a jewelers screwdriver to slowly pry up the edges. They will bend as you pry them up slowly as they are only potmetal. Work the sides and tops and bottom and go slow. Dont be surprised when they let go. The new emblem can be held in the camcover recesses by either using double sided adhesive or high temp RTV which is what I used on my car after getting the top end PCed. PM if you want this pair I can pull them out of my garage stash and take a pic for you. Dont ask me why I bought two pairs, I just did lol GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 03-22-2009 at 03:09 PM.

03-20-2009	#4
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,061	Re: Valve Cover Emblem ?'s Thanks Daryl. I gatta admit, I didnt expect them to be cheap, but dang!! I'll have my 92 at VOTR this year, and my engine looks pretty good, but the emblems have had it! PM me with a price when you get a chance. Thank you, John

03-20-2009	#5
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,843	Re: Valve Cover Emblem ?'s Last I looked Haibeck had them on his site at about $50 apiece for repro's. Still alot if you ask me. H

03-20-2009	#6
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,169	Re: Valve Cover Emblem ?'s Haibeck I beleive is $75.00 for repro's

03-20-2009	#8
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,446	Re: Valve Cover Emblem ?'s A pinstripper painted mine I did get a set from Jeff, not on yet There was a guy in Wisconsin years ago that made them