Nikasil guys right in our back yard!

[LGAFF]

I sent an e-mail asking for quote on replating of liners:

http://www.lnengineering.com/

LGAFF
92 ZR1
#234

[tomtom72]

Looks like they might be a great resource......I didn't know that Porsche used liners like ours? I guess it makes sense as it seems all the high end euro builders have similar engineering thoughts.

Good luck on this aspect of the job!


Tom

[LGAFF]

They also sell this oil:

http://www.lnengineering.com/store/c...case-p-29.html

Anyone used it?

LGAFF
92 ZR1
#234

[flyin ryan]

that oil is fairly well respected in the racing world. a lot of guys like the break-in oil.

[Zr1 Destroyer]

Originally Posted by LGAFF

They also sell this oil:

http://www.lnengineering.com/store/c...case-p-29.html

Anyone used it?

LGAFF
92 ZR1
#234

Hmmm...never tried that one! I used Gibbs break in oil with my stroker....good stuff!

[LGAFF]

This website has a few good articles on engine building:
here is an article on nikisal:

http://www.enginebuildermag.com/Article/36521/machining_new_metals__nickel_silicon_carbide_coati ngs.aspx


LGAFF
92 ZR1
#234

[flyin ryan]

Originally Posted by Zr1 Destroyer

I used Gibbs break in oil with my stroker....good stuff!

that's what i use as well, Joe Gibbs Driven-BR oil, in the engines i build. have a 45 gallon drum ready at all times. i think i mentioned on here before that i was invited to a seminar in September put on by Joe Gibbs Driven oil & hosted by Lake Speed Jr. it was a really good deal. would highly recommend it if anyone has the opportunity to go

[tomtom72]

Thanks for that other link about the coating process and engine/cylinder reconditioning....

I'm starting to learn alot from these threads about your motor autopsy/re-build.....or at least I think I'm beginning to learn that I didn't know how far this science has come since the late 60's/ early 70's...this is a steep curve when you stopped paying attention in the late 70's!

thanks guys!

[tomtom72]

I used to use Kendall GT-1 10w-40 in my 72 LT-1 motor after I rebuilt it waaaay back in '77...

That oil, from the link, seems to be a one stop shopping...no ZDDP from Kirban mixing with the syn oil of your choice. It's "in there" as they say! Or at least it appears to be all that flat tappet motors need in one package???

Thanks again!