![]() |
#1 |
![]() Join Date: Oct 2019
Location: California
Posts: 44
|
![]()
After 34 years of ownership, I'm downsizing and she has to go.
A lot of work done in the last 4k miles including injectors, shocks, brakes etc.. New RAM clutch installed at 86k with Jerry's Gaskets Flywheel. This clutch is not Dual mass and therefore makes some "rattling" noise. To do list - I may get to some of these before she's sold: Horn inop - traced to steering wheel. Probably broken wire last time it was at the dealership for steering column repair. Headliner sagging - needs glued back in place. Rattle noise from the rear going over bumps. Trying to track it down. Oil change due - only 700 miles but last one was a year ago. Drivers side carpet worn - I have a replacement. Lumbar support inop - motors are OK. Bladders are cracked and inop. |
![]() |
![]() |
![]() |
|
|