Rear gears and clutch set - ZR-1 Net Registry Forums

Gsgnz · 12-14-2021

Looking to re-gear and will need new clutch set (I believe it's called Trac Loc) also. Where does everyone source them? Is there a vendor on here that supports the registry that sells them?
Is there a DIY thread on this?

G8nightman · 12-16-2021

What gear size are you looking for?

Sent from my iPhone using ZR-1 Net Registry

Jcsws6 · 12-16-2021

I recently installed mopar 4:10s for a viper and replaced all the bearing. Ebay had the best price on the gears that I could find (from a dodge dealer in Texas). I've done gears before but found the corvette 44 fairly challenging to set up. I called every shop I could find in the St Louis area and not a single one would touch a corvette dana. I ended up getting a lot of help from a facebook group that specializes in gears.

Gsgnz · 12-16-2021

Most likely looking for a 4.10 but would entertain something in the 3.90 arena as well.

Care to share which facebook group? I assumed there was a good reason most Corvette rears are done at a few reputable shops.

I at least have to change the trac loc clutches as they are howling bad and no amount of fluid change/additive has been helpful.

Jcsws6 · 12-16-2021

Quote:

Originally Posted by Gsgnz

Most likely looking for a 4.10 but would entertain something in the 3.90 arena as well.

Care to share which facebook group? I assumed there was a good reason most Corvette rears are done at a few reputable shops.

I at least have to change the trac loc clutches as they are howling bad and no amount of fluid change/additive has been helpful.

Look up ?gear install technical group?. Seems to be a pretty good community.

12-14-2021	#1
Gsgnz Join Date: Apr 2021 Location: Colorado Posts: 20	Rear gears and clutch set Looking to re-gear and will need new clutch set (I believe it's called Trac Loc) also. Where does everyone source them? Is there a vendor on here that supports the registry that sells them? Is there a DIY thread on this?

12-16-2021	#2
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,192	Re: Rear gears and clutch set What gear size are you looking for? Sent from my iPhone using ZR-1 Net Registry __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

12-16-2021	#3
Jcsws6 Join Date: May 2021 Location: Freeburg IL Posts: 56	Re: Rear gears and clutch set I recently installed mopar 4:10s for a viper and replaced all the bearing. Ebay had the best price on the gears that I could find (from a dodge dealer in Texas). I've done gears before but found the corvette 44 fairly challenging to set up. I called every shop I could find in the St Louis area and not a single one would touch a corvette dana. I ended up getting a lot of help from a facebook group that specializes in gears.

12-16-2021	#4
Gsgnz Join Date: Apr 2021 Location: Colorado Posts: 20	Re: Rear gears and clutch set Most likely looking for a 4.10 but would entertain something in the 3.90 arena as well. Care to share which facebook group? I assumed there was a good reason most Corvette rears are done at a few reputable shops. I at least have to change the trac loc clutches as they are howling bad and no amount of fluid change/additive has been helpful.