|
05-12-2017
|
#1 |
 
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Ran the Z on the dyno today
Got my 1991 Z on the dyno today. Pretty happy with the results. With a K&N filter and Borla Challenge system it made 350whp and 334wtq.
1494626847373.jpg Sent from my XT1080 using ZR-1 Net Registry mobile app |
|
|
|
05-12-2017
|
#2 |
 
Join Date: Jul 2012
Location: Allentown, PA
Posts: 308
|
Re: Ran the Z on the dyno today
I don't mean to rain on your parade but it looks like it ran out of breath early. Do you still have the stock bellows between the filter housing and throttle body? May be collapsing if it's original. The K&N might be restricting air flow too if it's not perfectly clean.
Sent from my XT1254 using ZR-1 Net Registry mobile app
__________________
'95 ZR-1, aqua/gray, #167 368 LPE/Haibeck, Web cams, Stainless Works headers, B&B Fusion exhaust, 18" Fikse wheels, Alcon brakes, lowered. 491 SAE RWHP. |
|
|
|
|
05-12-2017
|
#3 | |
|
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Ran the Z on the dyno today
Quote:
Sent from my XT1080 using ZR-1 Net Registry mobile app |
|
|
|
|
|
05-12-2017
|
#4 |
|
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Ran the Z on the dyno today
Also, factory rating is 375hp @ 5800 rpm. Looks pretty close to me?
Sent from my XT1080 using ZR-1 Net Registry mobile app |
|
|
|
|
05-13-2017
|
#5 |
|
Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,044
|
Re: Ran the Z on the dyno today
Lot of dynos read differently.....They are good for tuning purposes if you ask me..A dyno jet and a mustang Dyno will read differently......Pretty good numbers for the set up you have...
|
|
|
|
|
05-13-2017
|
#6 | |
|
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Ran the Z on the dyno today
Quote:
 Realistically I was expecting more like 330whp, so I'm happy. |
|
|
|
|
|
05-14-2017
|
#7 |
|
Join Date: Jun 2013
Location: Toronto
Posts: 780
|
Re: Ran the Z on the dyno today
good numbers!!
|
|
|
|
 |
|
|
Linear Mode
