1990 side moulding giggle - ZR-1 Net Registry Forums

Vetman · 01-01-2014

I will be painting my 1990 z. Does the side moulding just pull off? Is there new avaliable? Mine is loose in a couple spots.

We Gone · 01-02-2014

Best I can remember 10mm nuts along the inside, the newer ones have nuts on the ends and snap clips down the center. Its been a long time since I removed any. You can look from the inside, on the doors remove the door panels to see before you try and pull them off. the front bumper cover will have to come off to remove it.

01-01-2014	#1
Vetman Join Date: Feb 2013 Location: Yakima Washington Posts: 411	1990 side moulding giggle I will be painting my 1990 z. Does the side moulding just pull off? Is there new avaliable? Mine is loose in a couple spots. __________________ Jim 1990 Z # 2441 1959 c-1 230 HP 4 speed frost blue/silver 3 owner 2011 cts-v 556 HP, manual 6 speed 1955 chev 2dr ht PP 265 3 speed w/OD Last edited by Vetman; 01-01-2014 at 11:57 PM.

01-02-2014	#2
We Gone Join Date: Apr 2004 Location: Atlanta, GA Posts: 2,170	Re: 1990 side moulding giggle Best I can remember 10mm nuts along the inside, the newer ones have nuts on the ends and snap clips down the center. Its been a long time since I removed any. You can look from the inside, on the doors remove the door panels to see before you try and pull them off. the front bumper cover will have to come off to remove it. __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 01-02-2014 at 12:17 AM.