![]() |
#1 |
![]() ![]() Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
|
![]()
I lost my mind...where do these T-40 and two clips go under the hood or on the LT5?
No...This is not the first time I had brain freeze ![]() Thanks, Cliff ![]() ![]()
__________________
Clickable links ![]() On Iphone Touchable Links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS |
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,193
|
![]()
The T40s are for the rear hold downs for the roof panel.
The others are from a 60 series John Deer combine http://talk.newagtalk.com/forums/thr...23&mid=1388269
__________________
Scott ![]() Vett owner since 1979._It's about the car and the people |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 157
|
![]()
Doesn't the silver clip hold the tranmission cable to the upper left side of the transmission? The small hole holds the plastic holding tab for the cable.
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,537
|
![]()
The ones on the left are self-sealing stembolts, the ones on the right are phase coil induction mounts...
![]() Dave
__________________
1991 #1516 Black/Black davidmkelly.com Author of fast-paced, sci-fi thrillers. |
![]() |
![]() |
![]() |
#5 |
![]() Join Date: Oct 2010
Location: Rock Hill, SC
Posts: 157
|
![]() Last edited by MikeGolf; 01-23-2013 at 12:41 AM. |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
![]()
The screws look like from the trg top.
The silver bracket is to hold down the vent tube for the transmission and the harness for reverse switch,1-4 skip plug,and speedo. The other looks like it holds a harness wire loom that goes over and around the rear end tunnel just over the C-beam and rear end. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
#7 | |
![]() ![]() Join Date: May 2007
Location: Peoria, AZ
Posts: 9,117
|
![]() Quote:
Quark would be so proud ![]()
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director ![]() 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,667
|
![]()
Just remembered the loom clip could also be for the harness that runs along side the driver side fender well that one of the fender well screws goes thru it.
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
![]() |
![]() |
![]() |
|
|