Is anyone using the ostrich? - ZR-1 Net Registry Forums

1990 quasar blue · 06-11-2012

I just received my updated calibration from Marc. I used tunerpro to load it to the ostrich. I installed it and the car starts up but the ses light stays on. I tried this a couple of times and I keep getting the same result. Has anyone else run into this?

TIA,
Mike

gbmidyear66 · 06-18-2012

I'm using the Moates G1 memory Adapter http://www.moates.net/g1-memory-adapter-tpi-etc.html - Of course you still need to have your original (or custom) memcal installed. In my case - I have a DRM memcal that has has some custom settings in the G1 adapter. Have had no problems with this setup.

FU · 06-18-2012

gbmidyear66 like that color !

XfireZ51 · 06-18-2012

1990,

I am assuming Marc sent you the cal via email? Is this the first time you've used the Ostrich? Few things to look at:

1. Is Ostrich installed correctly? Red stripe of cable should face outer edge of ECM.

2. R U using the correct Mask ID for the bin file?

3. If you made any changes, did you make sure the checksum is updated?

4. What is the MALF code?

When you first power up, turn ignition to ON, does SES light flash once, then stay on. That indicates prom and cal are OK.

06-11-2012	#1
1990 quasar blue Join Date: Feb 2004 Location: Ma Posts: 403	Is anyone using the ostrich? I just received my updated calibration from Marc. I used tunerpro to load it to the ostrich. I installed it and the car starts up but the ses light stays on. I tried this a couple of times and I keep getting the same result. Has anyone else run into this? TIA, Mike

06-18-2012	#2
gbmidyear66 Join Date: Feb 2008 Location: Vancouver, BC Posts: 251	Re: Is anyone using the ostrich? I'm using the Moates G1 memory Adapter http://www.moates.net/g1-memory-adapter-tpi-etc.html - Of course you still need to have your original (or custom) memcal installed. In my case - I have a DRM memcal that has has some custom settings in the G1 adapter. Have had no problems with this setup.

06-18-2012	#3
FU Join Date: Mar 2004 Location: Found Member Posts: 4,327	Re: Is anyone using the ostrich? gbmidyear66 like that color !

06-18-2012	#4
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,685	Re: Is anyone using the ostrich? 1990, I am assuming Marc sent you the cal via email? Is this the first time you've used the Ostrich? Few things to look at: 1. Is Ostrich installed correctly? Red stripe of cable should face outer edge of ECM. 2. R U using the correct Mask ID for the bin file? 3. If you made any changes, did you make sure the checksum is updated? 4. What is the MALF code? When you first power up, turn ignition to ON, does SES light flash once, then stay on. That indicates prom and cal are OK.