Cam Positioning Sensor - ZR-1 Net Registry Forums

ittlfly · 09-15-2011

The Z is throwing code 31 off and on for awhile now. Does anyone have a source for these? I sent Chris May @ Superior an email but he hasn't got back to me. I may be on borrrowed time here.

Thanks in advance

-=Jeff=- · 09-16-2011

I thought Lee (LGAFF) had found/bought one somewhere..

Kurt White shows these PNs:
10137658, 10096172

Kurt also has a $296.xx I am pretty sure Lee paid a lot less

tomtom72 · 09-16-2011

I'll toss this out here as a fwiw....my car used to do 31's at random and very frequently when I first got it. Okay so I figured I needed a sensor, after all it was 15 yrs old, right? Then I thought, wait a second...it's a magnet, no moving parts. I used contact cleaner & dielectric grease on the connector, both sides and still it would throw 31 randomly, but less frequently.

My final solution was when I start the car I turn the key to "on", watch everything light up & go out and then go to the "start" position and start her up. I haven't had a 31 since using that method. Strange, I'm thinking with age the air gap changes somehow? I'm thinking now that maybe I should have pulled it out and cleaned the face of the magnet? I don't know for sure what I should have done? It just bugs me that it's a dang magnet with no moving parts so how long does a magnet last? Or is it an electromagnet, and if it gets sludge on it's face will it need to be cleaned?

Tom

ittlfly · 09-16-2011

Quote:

Originally Posted by tomtom72

I'll toss this out here as a fwiw....my car used to do 31's at random and very frequently when I first got it. Okay so I figured I needed a sensor, after all it was 15 yrs old, right? Then I thought, wait a second...it's a magnet, no moving parts. I used contact cleaner & dielectric grease on the connector, both sides and still it would throw 31 randomly, but less frequently.

My final solution was when I start the car I turn the key to "on", watch everything light up & go out and then go to the "start" position and start her up. I haven't had a 31 since using that method. Strange, I'm thinking with age the air gap changes somehow? I'm thinking now that maybe I should have pulled it out and cleaned the face of the magnet? I don't know for sure what I should have done? It just bugs me that it's a dang magnet with no moving parts so how long does a magnet last? Or is it an electromagnet, and if it gets sludge on it's face will it need to be cleaned?

Tom

Thanks Tom for that info. It makes good sense. I have an old email from Marc H. that adresses the sensor. He talks about the fact it can only be checked when it codes and then with a scope. Something about a '''wave function'' as *I* recall. My guess is that it is an electromagnet??? I'll have to dig out that email..

LGAFF · 09-16-2011

readily available from autozone, Rock auto, etc.....$194

Wells makes all of these for Autozone

Low --- Select a Brand --- Duralast

Duralast/Camshaft Position Sensor

Price:
$199.99

Part Number: SU1101

GOLDCYLON · 09-16-2011

I paid a lot less than Lee but the source is on my home computer (I saved the link). Real obscure web site. Almost half of what Lee paid. I had to sign up for an account and it I thought well this was a gamble. But the part showed up lol. I will post up when I return late Thursday of next week. GC

A26B · 09-16-2011

Quote:

Originally Posted by ittlfly

The Z is throwing code 31 off and on for awhile now. Does anyone have a source for these? I sent Chris May @ Superior an email but he hasn't got back to me. I may be on borrrowed time here.

Thanks in advance

NEW
http://jerrysgaskets.com/store2/root...roducts_id=482

USED
http://jerrysgaskets.com/store2/root...roducts_id=257

ugo85r · 09-16-2011

the seal of my sensor are dead ! but i don't find just the seal ?
is somebody know where i can find them ?

GOLDCYLON · 09-16-2011

Quote:

Originally Posted by ugo85r

the seal of my sensor are dead ! but i don't find just the seal ?
is somebody know where i can find them ?

Just a standard oil resistant O-Ring. Just take to a hardware store and match up.

ittlfly · 09-16-2011

Quote:

Originally Posted by ugo85r

the seal of my sensor are dead ! but i don't find just the seal ?
is somebody know where i can find them ?

Napa Auto part # 801207 $4.00 It is an assortment of "O" rings for air conditioning repair. Just match your old O ring with one of those in the kit. Works great.

Above info .....Thanks to one of the members.

09-15-2011	#1
ittlfly Join Date: Jul 2009 Location: Redding Calif Posts: 223	Cam Positioning Sensor The Z is throwing code 31 off and on for awhile now. Does anyone have a source for these? I sent Chris May @ Superior an email but he hasn't got back to me. I may be on borrrowed time here. Thanks in advance

09-16-2011	#2
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,165	Re: Cam Positioning Sensor I thought Lee (LGAFF) had found/bought one somewhere.. Kurt White shows these PNs: 10137658, 10096172 Kurt also has a $296.xx I am pretty sure Lee paid a lot less __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978

09-16-2011	#3
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Cam Positioning Sensor I'll toss this out here as a fwiw....my car used to do 31's at random and very frequently when I first got it. Okay so I figured I needed a sensor, after all it was 15 yrs old, right? Then I thought, wait a second...it's a magnet, no moving parts. I used contact cleaner & dielectric grease on the connector, both sides and still it would throw 31 randomly, but less frequently. My final solution was when I start the car I turn the key to "on", watch everything light up & go out and then go to the "start" position and start her up. I haven't had a 31 since using that method. Strange, I'm thinking with age the air gap changes somehow? I'm thinking now that maybe I should have pulled it out and cleaned the face of the magnet? I don't know for sure what I should have done? It just bugs me that it's a dang magnet with no moving parts so how long does a magnet last? Or is it an electromagnet, and if it gets sludge on it's face will it need to be cleaned? Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

09-16-2011	#5
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Cam Positioning Sensor readily available from autozone, Rock auto, etc.....$194 Wells makes all of these for Autozone Low --- Select a Brand --- Duralast Duralast/Camshaft Position Sensor Price: $199.99 Part Number: SU1101 __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

09-16-2011	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Cam Positioning Sensor I paid a lot less than Lee but the source is on my home computer (I saved the link). Real obscure web site. Almost half of what Lee paid. I had to sign up for an account and it I thought well this was a gamble. But the part showed up lol. I will post up when I return late Thursday of next week. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

09-16-2011	#8
ugo85r Join Date: Sep 2011 Location: France Posts: 13	Re: Cam Positioning Sensor the seal of my sensor are dead ! but i don't find just the seal ? is somebody know where i can find them ?