Jerry's Gaskets is now selling LT5 parts

[QB93Z]

Here is a plug for Jerry. I was on his site to get a set of plenum gaskets and discovered that he has gotten all of his LT5 parts inventoried and listed for sale. So I of course had to add a few other thing to my basket.

Thanks Jerry for making these parts available to the ZR-1 community.

Check it out:

http://jerrysgaskets.com/store/index...=index&cPath=0

Jim

[bdw18_123]

Very cool! Just browsed through his entire listing of LT5 parts. If I find I'm missing a bolt or certain component is bad, I know where to go!

I'm planning to buy a full gasket kit from Jerry when I have the extra money to move forward on my ZR-1 project. Might also have to get one of those new cylinder liners he has listed, though I'd rather get a used liner. One of mine has small areas where the nikasil coating has come off, it's the cylinder on the driver's side that looked like it had coolant leak into it at some point, so that maybe that caused it.

I also need a power steering pump fluid reservoir, but he unfortunately doesn't have one of those.

[ZZZZZR1]

I spoke to Jerry about these items and he said he is still adding them....


Carefully documenting each one, taking pictures and posting them as he goes.


thanks for doing this Jerry!!!!!!!!




David

[Dynomite]

Thanks Jerry

Jerry's prices are very reasonable and his shipping is exceptionally fast

[ZR1Vette]

Very cool... he continues to set himself as a standard to be appreciated

[A26B]

Originally Posted by bdw18_123

Might also have to get one of those new cylinder liners he has listed, though I'd rather get a used liner. One of mine has small areas where the nikasil coating has come off, it's the cylinder on the driver's side that looked like it had coolant leak into it at some point, so that maybe that caused it.

I have several, "like new" liners that I will classify as used. Just haven't had time to put them up yet. I will try to do that tomorrow so you can see the photos.

Thanks for all the support guys. I still have quite a few parts to list, cams, heads, exhaust manifolds, late style catalytic convertors, cranks, etc. I also have a few projects in the works for new gaskets.

[flyin ryan]

Congrats Jerry . Updated site looks great

[JThomas]

I have dealt with Jerry on a couple of ocassions and it has always been great to work with him. Thanks Jerry and keep up the great work!

[A26B]

Originally Posted by bdw18_123

........ Might also have to get one of those new cylinder liners he has listed, though I'd rather get a used liner. One of mine has small areas where the nikasil coating has come off, it's the cylinder on the driver's side that looked like it had coolant leak into it at some point, so that maybe that caused it.........

http://jerrysgaskets.com/store/index...roducts_id=371

[bdw18_123]

Originally Posted by A26B

http://jerrysgaskets.com/store/index...roducts_id=371

Good price, thanks for getting them listed! More than likely I'll get one of those, but I want to get the passenger side head off first to make sure all the liners on that side are ok.