![]() |
#1 |
Join Date: Feb 2019
Location: Littleton, CO
Posts: 20
|
![]()
Hello all,
I have a code 55 presently (lean AFR). Here is what I have done so far: - Jumpered the fuel pump underhood connector to the battery via a VOM and got 9.1A (fuel pumps pass electrical test) - Connected fuel pressure gauge to service port on fuel rail and found the following when key was turned to the ON position: FP1 pulled - 50 psi (tapering to 45) FP2 pulled - 36-38 psi **Fuel filter replaced in late 2013 but no record of fuel pump replacement in the past** Do I just assume that the primary fuel pump is bad or has a loose connection somewhere? Or could it still be the fuel filter? If you think I should just plan to replace both fuel pumps, please advise what you think would be the best new pump. Thank you! Jordan |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|