1990 3rd brake light bulb replacement - ZR-1 Net Registry Forums

scorp508 · 07-15-2024

A couple photos from today while I was attempting to put LED G4 bulbs in. They didn't work as the base was too thick to fit into the housing. I have another style another ZR-1 owner successfully used now on the way.

The two T-30 bolts in the middle you need to first remove. There isn't much space, so a 1/4" drive T-30 socket if you have one works better than a 3/8" drive socket. I only have 3/8" drive in that size, so I start them then use my fingers to back them out.

07-15-2024	#1
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 166	Re: 1990 3rd brake light bulb replacement A couple photos from today while I was attempting to put LED G4 bulbs in. They didn't work as the base was too thick to fit into the housing. I have another style another ZR-1 owner successfully used now on the way. The two T-30 bolts in the middle you need to first remove. There isn't much space, so a 1/4" drive T-30 socket if you have one works better than a 3/8" drive socket. I only have 3/8" drive in that size, so I start them then use my fingers to back them out. Last edited by scorp508; 07-15-2024 at 03:57 PM.