Secondary fuel pump dead? - Page 3 - ZR-1 Net Registry Forums

scorp508 · 07-19-2024

Quote:

Originally Posted by Subfixer

I got the high flow pumps as I'm pushing around 560 crank hp.

Subfixer, did you need to do any modifications to get these pumps to fit into the sending unit? I received the kit from Lingenfetler and all ways going smoothly until trying to slide the new pumps into the frame.

My stock pumps measure ~36.75mm in width.
StockPump.jpg

The Walbro GSS340 pumps I received from Lingenfelter in the high flow kit measure ~39.18mm in width and will NOT push into the holder.
WalbroGSS430G3.jpg

https://walbrofuelpumps.com/255lph-w...pump.html.html

I don't see how these are going to go in without cutting a slit in the side of the frame for each pump, then praying to the zip-tie gods it holds together.

Subfixer · 07-19-2024

Yes. I split the holder down one side. Secured with tie wraps.

Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app

07-19-2024	#22
Subfixer Join Date: Sep 2018 Location: Groton, CT Posts: 379	Re: Secondary fuel pump dead? Yes. I split the holder down one side. Secured with tie wraps. Sent from my Pixel 4a (5G) using ZR-1 Net Registry mobile app __________________ 1992 ZR1 #442, 2 tops, White, White, Haibeck 415, 3.90 gear, Coilovers 2018 Audi RS5, 2.9 V6 Twin Turbo, Auto, Black, Black 2021 Audi Q3, 2.0T, 8 spd Tiptronic, Navarro Blue metallic, Pearl Beige