How to reset FX3 cod eon 1994 ZR1 - ZR-1 Net Registry Forums

Survivor69 · 2 Weeks Ago

I have a 94 ZR1 and I am trying to reset the selective ride control code dash light. I have read that I need to jump pin 3 and 4. Does someone have a schematic or step by step how to reset the light? Thanks!

Starman · 2 Weeks Ago

Sometimes the check at start up is a bit slow as the system looks for the shock actuators to fully cycle. When I start my 91, I turn the key on, but do not start it until the SRC light goes out.

Sent from my iPhone using ZR-1 Net Registry

secondchance · 2 Weeks Ago

Quote:

Originally Posted by Survivor69

I have a 94 ZR1 and I am trying to reset the selective ride control code dash light. I have read that I need to jump pin 3 and 4. Does someone have a schematic or step by step how to reset the light? Thanks!

SRC light will not turn on once malfunction has been addressed. I never tried resetting but even if you clear the code, unless the repair has been made, SRC light will light up again.
Also, if the ignition is turned on more than 5-6 times (not sure of exact number) without moving, SRC will light up.

2 Weeks Ago	#1
Survivor69 Join Date: Feb 2021 Location: MO Posts: 12	How to reset FX3 cod eon 1994 ZR1 I have a 94 ZR1 and I am trying to reset the selective ride control code dash light. I have read that I need to jump pin 3 and 4. Does someone have a schematic or step by step how to reset the light? Thanks!

2 Weeks Ago	#2
Starman Join Date: Sep 2008 Location: Speedway, IN Posts: 125	Re: How to reset FX3 cod eon 1994 ZR1 Sometimes the check at start up is a bit slow as the system looks for the shock actuators to fully cycle. When I start my 91, I turn the key on, but do not start it until the SRC light goes out. Sent from my iPhone using ZR-1 Net Registry