High/Hanging Idle - Page 3 - ZR-1 Net Registry Forums

ssmith95 · 2 Hours Ago

Im headed towards buying a smoke machine. This car has got me totally stumped. I tested two separate IAC valves tonight and both are fully seated in the passage. I used a curved pick to see if the pintle was fully seated and it was.

What is the lowest possible point a vacuum leak could occur, the injector housing gasket?

2 Hours Ago	#21
ssmith95 Join Date: Oct 2024 Location: Texas Posts: 11	Re: High/Hanging Idle Im headed towards buying a smoke machine. This car has got me totally stumped. I tested two separate IAC valves tonight and both are fully seated in the passage. I used a curved pick to see if the pintle was fully seated and it was. What is the lowest possible point a vacuum leak could occur, the injector housing gasket?