ZR-1 Net Registry Forums - View Single Post

TFENT · 09-27-2010

OK WOW!!

I just did this mod. IT WORKED!!!

God you guys are so great I tell ya. Took all of about 20 mins, a few parts, and reading the "directions" a few times to make sure I didn't screw it up. The beast roared right to life after completing the re-wire.

The only thing I should add to this is there are more then one purple wire in and around the pcm, so I couldn't figure out at first which one to hit. It's the biggest purple wire in the loom after the pcm. It's a light purple wire that's a 10 gauge wire. Not hard to find when you dig for it. I put a voltage gauge to it BEFORE I cut it to see if I was getting voltage out of it when I turned the key. Voltage was 7 volts. VICTORY!!

09-27-2010	#15
TFENT Join Date: Dec 2008 Location: San Diego Posts: 189	Re: Car didn't start OK WOW!! I just did this mod. IT WORKED!!! God you guys are so great I tell ya. Took all of about 20 mins, a few parts, and reading the "directions" a few times to make sure I didn't screw it up. The beast roared right to life after completing the re-wire. The only thing I should add to this is there are more then one purple wire in and around the pcm, so I couldn't figure out at first which one to hit. It's the biggest purple wire in the loom after the pcm. It's a light purple wire that's a 10 gauge wire. Not hard to find when you dig for it. I put a voltage gauge to it BEFORE I cut it to see if I was getting voltage out of it when I turned the key. Voltage was 7 volts. VICTORY!!