Quote:
Originally Posted by gbmidyear66
John
I did try the erase function - no luck. I think I will start by removing the rear connector at the ign module, inspect for any bent pins with a mirror and re-install.
Glenn
|
Glenn,
All you have to do to erase the codes is disconnect the battery for 10-15 seconds. Either post works, I would recommend the negative. After that run the car and see what codes are set, if any. If the 42 sets again then you will need to look into it further to find out how to diagnose. As I mentioned, the code 42 did not reset on the '93.