Quote:
Originally Posted by jonszr1
luis it could be a welding flash that broke off . if it were me i might consider getting another half shaft . it doesnt take much to really mess up alluminum . what u jhoints are you using , hopefully they dont have zek fitting to grease them . if they do take them back and order the 799 series spicer u joints they are the strongest out there . dennys drive shafts has a u joint kit that contains the 799 series for every u joint including the drive shaft . you dont want to skimp on the u joints as if they break it can get pricey in a hurry. hope this helps .
|
Neapco's no fittings. It feels heavier like theres another tube inside, more pronounced when I just shake it... kinda wobbles inside ..but not a metal clanking but a solid deep thumping wobble.
I did find one real bad u-joint on it that would make noise but this wobble i havent heard or couldnt hear on the road, it might not make any noise when its turning due to its deep sounding thumping noise when shaken by hand.
Im gonna take off the other side and see what its like.