ZR-1 Net Registry Forums - View Single Post

lbszr · 05-23-2010

If it will depress to the floor with the bleeder on the slave open, or the line loosened, or before the air is bleed out like you mentioned, then I would think the problem is probably at the slave end.

05-23-2010	#5
lbszr Join Date: Nov 2006 Location: dayton,ohio Posts: 424	Re: Clutch Slave Cyclinder If it will depress to the floor with the bleeder on the slave open, or the line loosened, or before the air is bleed out like you mentioned, then I would think the problem is probably at the slave end.