ZR-1 Net Registry Forums - View Single Post

A26B · 04-11-2010

Handy tip for keeping up with the WP bolts of varying lengths.

Put your new pump on the bench & as you remove a WP bolt, put it in the corresponding hole in the new pump.

When the old pump is off, put it on the bench and transfer the bolts from the new pump to the old pump.

Remove bolts from the old pump & install in corresponding hole in the new pump on engine.

04-11-2010	#4
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,397	Re: Leaking Waterpump? Handy tip for keeping up with the WP bolts of varying lengths. Put your new pump on the bench & as you remove a WP bolt, put it in the corresponding hole in the new pump. When the old pump is off, put it on the bench and transfer the bolts from the new pump to the old pump. Remove bolts from the old pump & install in corresponding hole in the new pump on engine. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.