ZR-1 Net Registry Forums - View Single Post

flyin ryan · 08-31-2009

Scotchbrite will work better than the factory 'Foam' if installed correctly. Have to remember the idea of it is to seperate the air from the oil, keep the oil in the engine & pull out only the vapors. Fold the Scothbrite onto itself once or twice (will be two or three layers thick), then pin it in place with the wire.

08-31-2009	#12
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,736	Re: Cam Cover Foam Filters Scotchbrite will work better than the factory 'Foam' if installed correctly. Have to remember the idea of it is to seperate the air from the oil, keep the oil in the engine & pull out only the vapors. Fold the Scothbrite onto itself once or twice (will be two or three layers thick), then pin it in place with the wire.