ZR-1 Net Registry Forums - View Single Post

John Boothby · 08-25-2009

This sounds too simple, but check to see if the throttle is rubbing against the tranny tunnel. Then check the throttle cables. They should have two clamps securing them to the top of the plenum. Then check the throttle body. You may have to remove the cover to check that the cables are properly connected to the throttle plate cams or rod. It could also be that the throttle plates are binding in the throttle body.

08-25-2009	#4
John Boothby Join Date: Jul 2005 Location: Las Vegas, Nevada Posts: 775	Re: Stiff gas pedal This sounds too simple, but check to see if the throttle is rubbing against the tranny tunnel. Then check the throttle cables. They should have two clamps securing them to the top of the plenum. Then check the throttle body. You may have to remove the cover to check that the cables are properly connected to the throttle plate cams or rod. It could also be that the throttle plates are binding in the throttle body.