Quote:
Originally Posted by Gary Yarbrough
I got my radiator and will be installing it by Saturday, so I'm back to trouble shooting the hesitation. While the car is drained of coolant, I took the opportunity to remove the plenum this morning. I'll be checking everything this afternoon/tomorrow.
My dad also convinced me to take a closer look at my MAP sensor. I noticed something that I need some opinions on. I'll try my best to describe this. Using a flashlight, I took a look inside the hole where the hose connects on the bottom of the sensor. While it was clean inside, I noticed that at the bottom of the hole, it appears to me that there is a small piece missing in the plastic. It looks as if I can see inside the sensor to some electronics. Since I don't know how the sensor is supposed to look, I suppose this could be normal, but the hole is irregularly shaped. Does it sound like I need a new MAP sensor?
|
If you are describing a vacuum connection that isn't sealed, then you need a new sensor. Trying to envision what you are describing.
