ZR-1 Net Registry Forums - View Single Post - Moment Of Inertia

tomtom72 · 08-13-2009

Craig, That's a bit strange about your set of magnecore wires. Mine don't do that. However, I looked under my rear 1/4 and I re did the antenna ground using GK's star washer + dielectric like he suggested for the SIR sensors. I figured it can't hurt anything. When I did the 1st plenum pull, I did the same to every ground wire I could locate also.

I agree with you Pete. Most times there is no substitute for the OE stuff's Q/Control. I bought those wires when I was collecting parts to do my first plenum pull....because my OE injectors went belly up because of the alcohol. I was soooooo nervous as a newbe that I swore that I was never gonna do this again.....

I laugh at myself now when I think about my mind set prior to my first plenum pull.

Tom

08-13-2009	#15
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,609	Re: Moment Of Inertia - Reduce MOI & Gain Horsepower Craig, That's a bit strange about your set of magnecore wires. Mine don't do that. However, I looked under my rear 1/4 and I re did the antenna ground using GK's star washer + dielectric like he suggested for the SIR sensors. I figured it can't hurt anything. When I did the 1st plenum pull, I did the same to every ground wire I could locate also. I agree with you Pete. Most times there is no substitute for the OE stuff's Q/Control. I bought those wires when I was collecting parts to do my first plenum pull....because my OE injectors went belly up because of the alcohol. I was soooooo nervous as a newbe that I swore that I was never gonna do this again..... I laugh at myself now when I think about my mind set prior to my first plenum pull. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member