Re: Removing Secondary Vacuum System questions.
Well I already have the plenum gaskets ordered from Jerry and I would like to get it back together by Wednesday if they come in. I don't want to have to order the injector housing gaskets and wait on them. If I went that far I would probably replace the breather gasket and loctite the bolts so they want back out (even though it doesn't leak after I pulled the plenum the first time and tightened the bolts.) I plan on having the money to go ahead and do the full top end porting and powder coating with stainless steel bolts and all early to mid next year, if all goes well. So I suppose I will just tie the linkage open for now and then take the plates out when I pull it all apart to do the porting along with a better clean up and replacing the breather gasket too. For now I'll put the 30 or so dollars I would have to spend on injector housings gaskets toward my c5 brake upgrade. Does this sound reasonable to you guys?
|