ZR-1 Net Registry Forums - View Single Post

tccrab · 07-20-2009

Tony:

The only gaskets you'll need is plenum gaskets, here's a link:
http://jerrysgaskets.com/store/index...fd0cfa83c0b2b1

Since the spark plug wires and coils can only be accessed with the plenum off, now is the time to replace them if you have any doubts at all.
See JeffVette on this forum for these, tell him I sent ya.

While you're under there, now's a good time to test all the vacuum secondary components. Make sure all the connections are leak free, and that all the components are working correctly.
Here's all you'll ever need to know (and more) about vacuum secondaries:
http://www.corvetteactioncenter.com/...0/002/article/

And finally, make sure to re-torque the oil box breather bolts and also the injector housing bolts. They tend to loosen with time.

Good luck!

TomC
"Crabs"

07-20-2009	#9
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,663	Re: Running rough Tony: The only gaskets you'll need is plenum gaskets, here's a link: http://jerrysgaskets.com/store/index...fd0cfa83c0b2b1 Since the spark plug wires and coils can only be accessed with the plenum off, now is the time to replace them if you have any doubts at all. See JeffVette on this forum for these, tell him I sent ya. While you're under there, now's a good time to test all the vacuum secondary components. Make sure all the connections are leak free, and that all the components are working correctly. Here's all you'll ever need to know (and more) about vacuum secondaries: http://www.corvetteactioncenter.com/...0/002/article/ And finally, make sure to re-torque the oil box breather bolts and also the injector housing bolts. They tend to loosen with time. Good luck! TomC "Crabs"