Re: Brake Bleeding Advice
Quote:
|
Originally Posted by Hotrod
Becareful when using the vaccuum method for bleeding the brakes.. when the vaccuum is applied and the bleeder screw loosened, air can be sucked in around the threads of the bleeder screw and end up in the system!
|
Yes be careful of that. It is difficult to get the hang of not letting the air in around the threads of the bleeder screw. Next time I do it I'm going to have it done by a shop with the proper pres bleeder. I wasted too much time getting it air free to be worth the trouble. I finally used teflon pipe dope on the threads, carefully, to get a good seal.
Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
|