[Paul Workman]

Originally Posted by tomtom72

just a fwiw, I do mine every yr.

remove gas cap, do relief @ the rail, use a pan under the filter location, remove heat shield, loosen fuel lines, let drip into pan & do the trans & pan plug, take a break, when fluids stop, get back under & finish the job.

The only "quirk" is the bolt for the filter/frame clamp has the return line across it, you need to gently pry on the line to move it just a bit to get the wrench on that bolt for the frame clamp.

Kewal! Sounds like you've done it a few times, and you have (and it shows!).

Thanks to all!

P.