ZR-1 Net Registry Forums - View Single Post

Aurora40 · 12-12-2005

The IH's are off the car. The cylinder head intake ports are taped over, it for sure didn't fall in there.

I updated an injector thread on CF. I have already ordered the MSD secondaries, they should ship in the next week. I also placed an order for Delphi '93-95 primaries. Marc Haibeck sells an o-ring set that allows them to fit. They are about $15 cheaper per injector than the '90-92 primary. So I'll be swapping them all out with OEM stuff for less than the cost of RC (barely less).

It seems RC is recommended on price and their tight tolerances. So they seem like a nice change. I guess I'd rather stick with stock since I know it worked for 15 years. And that RC Engineering sticker on the injectors is ugly...

I factored out price by shopping around, but there's still the tight tolerance factor. If you don't care about stock vs non-stock, it sure sounds like RC makes a good product.

12-12-2005	#8
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,704	Re: Update on injectors The IH's are off the car. The cylinder head intake ports are taped over, it for sure didn't fall in there. I updated an injector thread on CF. I have already ordered the MSD secondaries, they should ship in the next week. I also placed an order for Delphi '93-95 primaries. Marc Haibeck sells an o-ring set that allows them to fit. They are about $15 cheaper per injector than the '90-92 primary. So I'll be swapping them all out with OEM stuff for less than the cost of RC (barely less). It seems RC is recommended on price and their tight tolerances. So they seem like a nice change. I guess I'd rather stick with stock since I know it worked for 15 years. And that RC Engineering sticker on the injectors is ugly... I factored out price by shopping around, but there's still the tight tolerance factor. If you don't care about stock vs non-stock, it sure sounds like RC makes a good product.