ZR-1 Net Registry Forums - View Single Post

Aurora40 · 12-12-2005

Yeah, I'll probably pull the coil pack assembly... It may have gone there. The bolts aren't expensive, though. But I wouldn't want it rattling around or anything. I could reach on top of the tranny fairly well from under the car and couldn't find anything.

My breather box bolts had about an extra 1/2 to 1 turn in them. They weren't really loose, but not quite tight either.

I should snap a pict of my secondary solenoid. I understand it would need to bring air in to release the vacuum, and so you'd want a filter. But I'll be danged if I see where that might be on it.

12-12-2005	#5
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,704	Re: Update on injectors Yeah, I'll probably pull the coil pack assembly... It may have gone there. The bolts aren't expensive, though. But I wouldn't want it rattling around or anything. I could reach on top of the tranny fairly well from under the car and couldn't find anything. My breather box bolts had about an extra 1/2 to 1 turn in them. They weren't really loose, but not quite tight either. I should snap a pict of my secondary solenoid. I understand it would need to bring air in to release the vacuum, and so you'd want a filter. But I'll be danged if I see where that might be on it.