Quote:
Originally Posted by HADI-ZR1
why i should use Fidanza FIVE Point FOUR Clutch Kit - GM Corvette ZR-1 , which is for race, and it say USE with Stock Flywheel.
But for Fidanza TWO Point ONE Clutch Kit, which use for light Mod. Lt5, it say USE with Findanza Flywheel.
It is strange. any one know why? the fact!
|
Hadi,
I would direct the question to Fidanza. I just happened to be looking for a clutch for my Fidanza aluminum flywheel and here is some information from Brad at Fidanza:
Hey Craig,
> Thanks for contacting Fidanza. Here are the
> part numbers and torque specs:
> #391841 424 lb-ft.
#391842 589 lb-ft.
#391843 702 lb-ft.
#391844 665 lb-ft.
> The clutch should be balanced with the flywheel
> as an assembly. Also, you should use a sprung hub clutch
> disc (all of the part numbers listed above except the 391844
> are sprung hub). Doing both of these will help eliminate
> some of the clutch chatter that you may
> experience.
> Thank
> You,
> Brad
> Bojc
> Fidanza Engineering
> Corp.4285 Main
> StreetPerry, Ohio
> 44081
>
brad@fidanza.comwww.fidanza.comAIM:
> FidanzaSVT
> Phone: (440) 259-5656
> x111Fax: (440)
> 259-5588