Re: Lets see our Canadian ZR-1s
Greetings!
When I posted a few weeks ago asking about oil types/capacites for complete fluid change, I think it was Ryan who asked me to send pictures. The car is now home (1990, 78,000 km), so if I've figured out how to do this correctly, here they are!
The car was pretty dirty when I got it, but it has cleaned up quite nicely. I have soaked the seats in leather conditioner, vaccumed it out and generally cleaned the interior since the photos were taken. The engine bay needs a good detailing. Original finish will have to do, 'cause it's too much coin to powder coat right now.
The paint seems to be original, and needs a good buffing/polishing/wax. Lots of surface scratches and several stone chips to touch up.
Thanks to everyone's assistance here, the motor oil/filter, trans, diff, and coolant, thermostat and air and fuel filter have now all been changed. Once I put a few miles on it and am satisfied there are no leaks, I'll change the brake/clutch fluid and power steering fluid as well.
I hope to have it on the road by mid-May. Can't wait!
Cheers
Mark
|