ZR-1 Net Registry Forums - View Single Post - New here, just bought '90 ZR-1

A26B · 04-14-2009

Welcome! It will all work out whatever you should decide.
You don't have to buy new parts for everything as there is a fair amount of used available. Depending on the damage, heads can be repaired (new seats, little welding & grinding in the chamber, etc.) I have "some" used parts that could be helpful. There should also be used pistons & liners out there from engine upgrades.

I have all the gaskets & seals available. (Thanks for the recommendation Tom!)

The Registry is the best tool in a members box. Great folks here always willing to help.

Good luck with the project.

04-14-2009	#13
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,401	Re: New here, just bought '90 ZR-1 Welcome! It will all work out whatever you should decide. You don't have to buy new parts for everything as there is a fair amount of used available. Depending on the damage, heads can be repaired (new seats, little welding & grinding in the chamber, etc.) I have "some" used parts that could be helpful. There should also be used pistons & liners out there from engine upgrades. I have all the gaskets & seals available. (Thanks for the recommendation Tom!) The Registry is the best tool in a members box. Great folks here always willing to help. Good luck with the project. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.