Quote:
Originally Posted by XfireZ51
Greg,
Try fitting some spade lugs in the slots and then connecting Ohmeter to them.
|
Spades wouldn't even fit up in those tiny slots. I did however use some wires.
Testing of the original GM coils got me:
Primary / Secondary
1. .6 ohms / 5.63 k-ohms
2. .6 ohms / 5.57 k-ohms
3. .6 ohms / zero
4. .6 ohms / zero
All the stock coils look fine on the primary readings. The secondary readings do look suspect.
I'll try to pull the Summit/Accel coils and get a primary reading on them today if possible.