Sunday is my only day I have a few hours I can work on my own car. I just took it apart again. Here's some pics.
Jeff, take a look at the pic of the DIS module. This is with the plenum laying upside down. Can you please tell me if any of the pins are missing? It looks fine to me. Given that you're looking at the module mounted to the plenum and the plenum is upside down, there is 7 slots for pins, the screw, and then 7 more slots for pins. Looking at the pic, the pins slots are as:
1. empty
2. empty
3. empty
4. pin
5. pin
6. pin
7. pin
SCREW
1. pin
2. pin
3. pin
4. pin
5. pin
6. empty
7. pin
Here's the confusing part:
Looking at the DIS module, there are 4 pins in the first set of 7 slots and 6 pins in the second set of 7 slots.
Looking at the DIS modue connector, there are only 4 electrical female slots on each side for the pins in the module. It doesn't match up...... 6 pins and 4 female slots for those 6 pins on the right side. Do I take it that 2 of those pins on the right side are just there for no reason and not used?
I don't think I have a broken or bent pin. I really don't see anything wrong.
Also, I double and triple checked the plug wire orientation. It is all correct.
