ZR-1 Net Registry Forums - View Single Post

jonszr1 · 03-11-2009

do you have street tires ????if so go around the wet box .put the car in second gear for your burnout . i differ from rick alittle bit on the starting line and the first to second gear change .not to say his way wont work . i would put the starting line rpms at no higher than 2000 then let the clutch out fast but dont pop it .short shift 1st to second at 6000 then you can shift second to third at 6600-6800 rpm and go thru the lights in third . this proceedure is for if you have 3.45 rear gears (stk) if you have 4.10s then go thru in 4th . i have some vids on u tube that may help . just type in joeshmoe12301230 for all 11 vids . you can also go to rangers site for helpfull hints on drag strip proceedures . hope this helps and have fun but watch out drag racing can be addictive .ps please ck the condition of your 1/2 shaft u joints before going .breaking one of them will cause you to have to get towed home . the car will not move with only 1 1/2shaft .

03-11-2009	#3
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: so how do you drag a C4 ZR1 ? do you have street tires ????if so go around the wet box .put the car in second gear for your burnout . i differ from rick alittle bit on the starting line and the first to second gear change .not to say his way wont work . i would put the starting line rpms at no higher than 2000 then let the clutch out fast but dont pop it .short shift 1st to second at 6000 then you can shift second to third at 6600-6800 rpm and go thru the lights in third . this proceedure is for if you have 3.45 rear gears (stk) if you have 4.10s then go thru in 4th . i have some vids on u tube that may help . just type in joeshmoe12301230 for all 11 vids . you can also go to rangers site for helpfull hints on drag strip proceedures . hope this helps and have fun but watch out drag racing can be addictive .ps please ck the condition of your 1/2 shaft u joints before going .breaking one of them will cause you to have to get towed home . the car will not move with only 1 1/2shaft .