Quote:
Originally Posted by HADI-ZR1
gbrtng,
The driver side window faild to work! the right side work OK!!
I restore and repaint door panel, since the kid remove it and the car Door were repaint too, so i dont know what mistake He did during work !  |
The switch is probably disconnected from the wiring harness, or a wire is broken, or the switch is defective, or the window motor is not getting power, or the motor has failed. Take a look at the switch and its connector and wiring. There should be 12 volts positive or negative between the power feed wires to the motor - they are dark blue and brown. (Since the panel was removed, I'll bet that a connector was left unconnected.)
Glenn