ZR-1 Net Registry Forums - View Single Post - Looking for power on a budget... Nitrous???

jonszr1 · 10-15-2008

a good person to talk with about this is either jeff who has shared with you or corey henderson 210 867 6286@ henderson performance tec. both are 2 of the most respected builders of our engines . i know it sounds strange but what jeff has shared about the fuel milage with the strokers is very true and well shared among the folks here .he doesnt do anything other than tell it like it is . a 368 unshrouds the valves in our motors a decent 368 with porting can make between 460-500 rwhp depending on cam timming . believe me its plenty of power for a street car . going to 385 or 415 adds 5k at least to the bill due to the fact you need a different crank that has to be made 1 off by bryant or another custom crank builder . i would stay away from nitros as jeff has shared if it goes bad it gets ugly and expensive quick . nitros is a engine builders best friend . hope this helps

10-15-2008	#8
jonszr1 Join Date: Sep 2006 Location: lone pine and mammoth lakes Posts: 1,406	Re: Looking for power on a budget... Nitrous??? a good person to talk with about this is either jeff who has shared with you or corey henderson 210 867 6286@ henderson performance tec. both are 2 of the most respected builders of our engines . i know it sounds strange but what jeff has shared about the fuel milage with the strokers is very true and well shared among the folks here .he doesnt do anything other than tell it like it is . a 368 unshrouds the valves in our motors a decent 368 with porting can make between 460-500 rwhp depending on cam timming . believe me its plenty of power for a street car . going to 385 or 415 adds 5k at least to the bill due to the fact you need a different crank that has to be made 1 off by bryant or another custom crank builder . i would stay away from nitros as jeff has shared if it goes bad it gets ugly and expensive quick . nitros is a engine builders best friend . hope this helps