ZR-1 Net Registry Forums - View Single Post - Intermittent problem with full power mode

10-15-2008

Sounds like a secondary issue.

You can pull codes using a paperclip.

Ground plugs A & B on the ALDL together and watch the pulses of the SES light. It will start with a 12 and then cycle through and end with a 12.

10-15-2008	#4
Jeffvette Guest Posts: n/a	Re: Intermittent problem with full power mode Sounds like a secondary issue. You can pull codes using a paperclip. Ground plugs A & B on the ALDL together and watch the pulses of the SES light. It will start with a 12 and then cycle through and end with a 12.