ZR-1 Net Registry Forums - View Single Post - What do i need to hit 11.9-12.2 range

LGAFF · 05-24-2008

1984-96 (C4) Dual Mount Rear Composite Monospring Kit
Corvette Monospring Kit, Rear, Dual Mount, Composite, 1984-1996
Dual Mount Monospring can be set for a soft ride or high performance handling by simply changing the mounting block adjustment points. You can also adjust the ride height up or down 1" using the adjustable spring bolts. This kit will work with any front spring setup and rate (from stock to 860 lbs./in.) and is ideally matched to front monospring kits. Installation is all Bolt-on with the exception of 4 holes which must be drilled into differential crossmember for bolting on the kit's two mounting brackets for 63-79 Corvettes. The kit includes a specially made rear monospring, adjustable long spring bolts with polyurethane cushions, mounting brackets, blocks and plates and all necessary hardware and installation instructions.

05-24-2008	#32
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: What do i need to hit 11.9-12.2 range 1984-96 (C4) Dual Mount Rear Composite Monospring Kit Corvette Monospring Kit, Rear, Dual Mount, Composite, 1984-1996 Dual Mount Monospring can be set for a soft ride or high performance handling by simply changing the mounting block adjustment points. You can also adjust the ride height up or down 1" using the adjustable spring bolts. This kit will work with any front spring setup and rate (from stock to 860 lbs./in.) and is ideally matched to front monospring kits. Installation is all Bolt-on with the exception of 4 holes which must be drilled into differential crossmember for bolting on the kit's two mounting brackets for 63-79 Corvettes. The kit includes a specially made rear monospring, adjustable long spring bolts with polyurethane cushions, mounting brackets, blocks and plates and all necessary hardware and installation instructions.