[32valvZ]

Originally Posted by DMark

You'll need to pull the K Braces off to get enough room to reach those small front bolts.

Here is a link where I was helped out.....

http://www.zr1netregistry.com/forum/...ead.php?t=5107

Actually....you dont need to pull them. I did it without pulling them. If you have a ratcheting box wrench (10mm) and a regular (8mm) box wrench thats about 4" long, you can fit the tools up in there & use a long stout screwdriver to turn the wrenhces. Using the K brace for a pivot point helps a bunch. Took me about 15-20 minutes to get to all the front-most pan bolts and I was done with them.