Quote:
Originally Posted by Ozruss90
The fuel pump in there now is a new single pump unit, and the green wire at the ECM has been de pinned as per the instructions that came with the pump unit.
Power to the pump is fine and tested the pump running and pumping fuel with the sender unit / pump out of the tank ( submerged in fuel ) It is pumping fuel as it should, therefore I?m assuming the problem is elsewhere..
|
I suggest that you check the fuel pressure at the fuel rail before the ignition key is turned and after the motor dies after starting. Fuel pump may be fine but the command it's getting from the ECM might be screwy with reconfiguration of electrical connector.
Just my 2 cents.