Quote:
Originally Posted by Tim555
It was firmly in place. The loose piece was the chain guide that is attached to the top of the cam cover. The plastic seemed fine and didnt have much wear. I don?t plan on replacing it. I?ll take some pics and videos of it when I?m home in a few days.
|
If I understand you correctly, the steel guide was loose from the Cam Cover?
If so, I suggest you remove both screws, clean the screws & the tapped holes with brake cleaner & blow dry before reinstalling with Loctite 262 (red high strength) You absolutely do not want it to come completely loose & get caught up in the timing chains. It has happened before.
Otherwise, I understand the plastic facing was firmly attached to the steel guide. Correct?
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994
ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.