Re: 1992 Upper Radiator Shroud Removal
SubFixer,
Took at least 6 to 8 tries to get the upper radiator shroud in. Would try every 20 minutes or so. Twisting and banging. Finally got it passed the small upper radiator inlet and then it fell right into place.
Just finished aligning the nose and getting the easy 4 of the 7mm flat head screws in. Was able to use a long 7mm socket screwdriver to remove and reinstall those screws.
Will use a 7mm swivel ratchet wrench to install the top 2 flat head screws. Use blue painters tape to jam and hold the screw heads into the wrench head.
If you're referring to the 1/4 inch radiator spacers? Already have the bottom installed. Had to get long screws. Clamped the fan housing down with vice grips and just couldn't get the 10mm screws to start.
Thanks,
Gary
....
|