[tpepmeie]

Originally Posted by scorp508

My '94 has custom Web-Cam camshafts designed by a previous owner.

I believe they're roughly the following @ centerline. Not sure on the LSA.

Intake: 275* duration, .435" lift.
Exhaust: 248* duration, .432" lift.

Idle: https://www.youtube.com/watch?v=YhmimYEVaQA

Dyno: https://www.youtube.com/watch?v=H6PyzYl_LlE

The lift figures look reasonable for welded cams. Those duration numbers, though, don't make sense. 275 degrees intake would have to be seat-to-seat (total) duration. Most people refer to the .050" duration numbers, which would be something much less, around 230 degrees? Stock is 214 primary / 228 secondary.

248 exhaust wouldn't be a reasonable duration @ .050" lift, but also too short for total duration. i'd be curious to see the cam card on those.