ZR-1 Net Registry Forums - View Single Post - Driveshaft removal for speedo gear swap. C-Beam out or not?

scorp508 · 06-22-2024

I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need to get a ratcheting wrench for those, ugh...) and pull the driveshaft with the beam still in the car.

06-22-2024	#12
scorp508 Join Date: Jan 2024 Location: Boston, MA Posts: 196	Re: Driveshaft removal for speedo gear swap. C-Beam out or not? I finally did this yesterday and phrogs is totally correct. I left the C-beam in and moved it towards the passenger side once unbolted. There was plenty of room to undo the rear strap bolts (I need to get a ratcheting wrench for those, ugh...) and pull the driveshaft with the beam still in the car. __________________ 1987: Z51 Coupe, Z51, 4+3, Yellow / Graphite, 310 RWHP 350ck L98 1994: ZR-1 #150, Admiral Blue / Black, 445 RWHP 350ci LT5 2015: Z06 Coupe, Z07, M7, Arctic White / Red, Stock LT4 Last edited by scorp508; 06-24-2024 at 11:46 AM.