The info in the advertisement sheet says "900 degree flash point." At the bottom in the fine print it says "believed to be accurate at time of issue."
MSDS says 270 degree flash point.
False advertising.
So here's what we can deduce from the info they provide:
- It's a plant based oil.
- There is very little actual data on its chemical properties aside from flash point and kinematic viscosity.
- The only actual wear test info provided has no data on what the actual test results were (like a scar size on a gear tooth or bearing) because "the weld point exceeded maximum limits." That doesn't sound good.
Sent from my BBF100-2 using
ZR-1 Net Registry mobile app