ZR-1 Net Registry Forums - View Single Post - Converting an L98 Tensioner to Replace Discontinued GM #10067479 for LT5

2poor4aZR1 · 04-11-2023

Annnnnd the locating "nub" needs to be relocated to the other side of the mount, and the old nub cut off

IMG_20230408_111759.jpg IMG_20230408_112943.jpg

At this point, the center shaft of the base needs to have the keyway for the spring moved. Unfortunately I couldn't find any pics on the form of the inside of the tensioner (it was hard just finding pictures of the back of the unit), and this hasn't been done. I'll update this section when I get my hands on either an OEM unit to model or a picture of the inside.

[Reserved for future use]

04-11-2023	#3
2poor4aZR1 Join Date: Mar 2023 Location: Texas Posts: 34	Re: Converting a L98 tensioner to replace a 10067479 Annnnnd the locating "nub" needs to be relocated to the other side of the mount, and the old nub cut off IMG_20230408_111759.jpg IMG_20230408_112943.jpg At this point, the center shaft of the base needs to have the keyway for the spring moved. Unfortunately I couldn't find any pics on the form of the inside of the tensioner (it was hard just finding pictures of the back of the unit), and this hasn't been done. I'll update this section when I get my hands on either an OEM unit to model or a picture of the inside. [Reserved for future use]